RKI Instruments SDM-2012 Standalone Configuration - Manual (Page 36)

31 • Setting the Operational Parameters in Edit Mode
5. To edit the tested sensor setting, press and release the EDIT ENTER button.
An “E” will appear to the left of GAS.
6. Use the BUMP
T
and CAL
S
buttons to toggle between Std and ALL.
7. Once you have made your selection, press and release the EDIT ENTER
button. The “E” to the left of GAS will disappear.
8. Use the BUMP
T
button to scroll down past the tested sensor setting. The
screen will indicate that the parameter changes have been saved. The
appearance of the screen will be affected by the type of instrument inserted in
the SDM-2012.
The instrument will return to the home screen.
Std
E GAS
Std
DECISION
GAS 1
Std
DECISION
GX-2012 Gas Tracer