RKI Instruments GX-82A User Manual
Page 15
Model GX-82A Instruction Manual
12
Hayward, California (510) 441-5656
DISPLAY FUNCTIONS
While the GX-82A is in normal operation, press the DISPLAY/(ADJ.)
switch to step through the measurement functions. The display will
hold for 20 seconds before reverting to normal detection, or until
DISPLAY/(ADJ.) is pressed to go to the next screen.
User and Station ID
This screen appears only when the user ID option is activated. (See
USER OPTIONS.) Use this screen to verify user, location, or other
programmed information.
To change User and Station ID:
1. At the User and Station ID screen, press ON/OFF/ENTER.
2. The first character (left end) on “U ID” will flash. Press AIR or
SHIFT to scroll through 0 - 9, A - Z to select the desired character.
3. Press ON/OFF/ENTER to enter that value and move to the next
character.
4. Repeat steps 1. and 2. until the desired User and Station IDs are
entered.
Peak
The Peak function shows the highest (lowest for O
2
) concentrations
detected since the GX-82A was turned on. Peak readings (indicated
by “P” at the left side of the display) stay in the instrument’s memory
U ID:0123456789
S ID:ABCDEFGHIJ