Powertrax 3710 - Manual (Page 2)

2
Introduction
Welcome to the growing family of LOCK-RIGHT owners!
This manual will help you install your new LOCK-RIGHT automatic
100% full-locking differential. When the installation is complete,
your vehicle will have extreme traction! We trust that you will be
pleased with its performance and thank you for your confidence
in our products.
LOCK-RIGHT installation simply involves disassembling
and re-assembling the differential case, replacing a few parts in
the process. These instructions are detailed to the point that a
person who is reasonably familar with automotive work can install
a LOCK-RIGHT into a C-Clip integral carrier axle (and into certain
non-C-Clip variants) in about one hour, and into other integral car-
rier axles in about 2-1/2 hours; please read them carefully before
you start to be sure that you thoroughly understand them. Do not
attempt shortcuts unless you know exactly what you are doing.
These instructions also assume that you have the proper shop
manual for reference to instructions about axle shaft removal,
torque values, settings, clearances, etc. that apply to your par-
ticular vehicle. Our manual is a general guide to operations but
does not contain specific information for each vehicle.
Remember: This instruction manual is provided for your
convienience to assist you or your mechanic with the installation
of your new LOCK-RIGHT. However, the ultimate responsibility
for the success of your installation and the subsequent proper
operation of your vehicle rest with you, the vehicle owner.
When your installation is complete, you will have
a vehicle with significantly increased capabilities. For con-
tinued “fun in the sun,” operate it in a safe and responsi-
ble manner. Be sure to read and understand the driving in-
formation in the LOCK-RIGHT Vehicle Owner’s Manual!