Pololu Wixel - Manual (Page 53)

Tips
• The yellow LED is normally on, and flickers whenever data is received from the radio, which might be useful
for debugging your wireless connection.
• You can use wires with pre-crimped terminals [http://www.pololu.com/category/71/wires-with-pre-crimped-terminals]
and crimp connector housings [http://www.pololu.com/category/70/crimp-connector-housings] to make a custom cable
between the Wixel and the ShiftBrite chain.
Versions
• Shiftbrite App v1.1 [http://www.pololu.com/file/download/shiftbrite-v1.1.wxl?file_id=0J469] (20k wxl), released
2011-04-06: Changed the yellow LED to be normally on, but flicker whenever data is received from the radio.
This version is only compatible with Wireless Serial App v1.2 and later.
• Shiftbrite App v1.0 [http://www.pololu.com/file/download/shiftbrite-v1.0.wxl?file_id=0J466] (18k wxl), released
2011-03-28: Initial release. In this version, the yellow LED starts off and turns on after the first Enter is received.
This version is only compatible with Wireless Serial App versions 1.0 and 1.1.
Pololu Wixel User's Guide © 2001–2014 Pololu Corporation
9. Wixel Apps Page 53 of 64