Paxton Net2 Entry - Monitor - Manual (Page 4)

Page 4
Configuration
When the monitor is first connected to the
network it will not have a Monitor ID number.
3. Touch the 'Installer settings' option.
Next, if the system has an Engineer code it must
be entered.
4. Touch the 'Enter monitor ID' option.
Setting the Monitor ID
The monitor ID is the number that a visitor will
call to request entry (unless they are using a text
only list) so it should relate to the location of the
monitor where possible e.g. Flat Number.
1. Touch the screen to display the menu.
2. Touch the 'Monitor settings' option.
5. Enter the Monitor ID number.
Use the on-screen keypad and press 'Accept'.
'Language' and 'Easy read' options may be
selected during the configuration process.
Touch the 'Display settings' option to change
these if required. Return to the 'Settings' screen
once this has been completed.