Pavement Ends 51201 Replay - Manual (Page 3)

51201 pg 3 0612 Rev. B
Step Five
U
NFASTEN
C
ENTER
B
OW
Unfasten the hook and loop fl aps around the Bows on
each side of the sport bar.
Step Six
R
EMOVE
H
EADER
S
CREWS
Collapse the bow assembly down onto the tailgate to
access the header. Remove the two screws that secure
the fabric to the header.
Step Seven
R
EMOVE
T
OP
F
ABRIC
Raise the bow assembly and lock the header to the windshield.
Drape the top fabric, backing side up, over the hood and
windshield. Remove the twenty-seven (27) screws that secure
the fabric to the upper and lower headers. Set the screws aside
for use in installing the new top. Slide the extrusion along the
front edge of the top out of the channel in the lower header and
remove the old top from the vehicle.
Remove
Screws
Top Fabric - Backing Side Up
Remove Screws (27)
Across Header
Slide Extrusion along
the Front Edge of the
Channel to remove
Top
View from inside vehicle
Sport Bar
Unfasten hook and
loop to unwrap fl ap
Bow in front
of Sport Bar
Bow behind
Sport Bar
Unfasten hook and
loop to unwrap fl ap
View from inside vehicle
Rear Window Opening