Omnitron Systems Technology iConverter 2GXM - Manual (Page 40)

PI
VLAN Membership - iConverter 2GXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 1 Model Number = 8999-0
VLAN ID (VID) Port 1 Port 2 BP A BP B Mngmnt
1: 100 Yes No No No No
Add new entry (a), Delete entry (d), Edit entry (e), Clear table (c)
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
The VLAN membership entries are saved from the Port configuration screen, option 4.
4.3.8 cNode Loopback
The 2GXM has implemented Iometrix cNode Level 1 agent for testing performance metrics. The agent
recognizes measurement packets and loops them back to the sending cNode device. Iometrix cNode
equipment is required to obtain performance metrics.
cNode configuration is accessed by selecting option 10 from the Port configuration screen.
PI SA
cNode Control -iConverter 2GXM iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 3 Model Number = 8999-0
1: cNode Loopback Disabled
2: cNode Rate Limit 64 Kbps
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
From the menu, loopback can be enabled or disabled and the rate limit can be selected.
Page 40