Omnitron Systems Technology iConverter 2GXM - Manual (Page 20)

Page 20
3.4.5 Access the 2GXM Remotely
Remote access to the 2GXM is provided via SNMP, Telnet, FTP or an external serial modem connected to
the Serial Console Port.
3.4.5.1 Accessing the 2GXM via NetOutlook (SNMP)
The 2GXM module can be remotely accessed by SNMP-client software such as NetOutlook or third-party
SNMP management software. See Setting SNMP Preferences Section 3.4.2, on how to configure the
required parameters.
NetOutlook Chassis View and Trap Log Screens
3.4.5.2 Accessing the 2GXM via Telnet
The 2GXM is shipped from the factory with Telnet enabled. The default Telnet password is “public”. It is
highly recommended that the network administrator set a new Telnet password in order to prevent
unauthorized access to the unit. Telnet configuration parameters are available from the IP and Control
Preferences screen, option 6.