Omnitron Systems Technology iConverter 2GXM2 - Manual

The iConverter ® 2GXM2 conforms to the Ethernet in the First
Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan
and Enterprise LAN networks. The 2GXM2 provides intelligent,
securely managed service demarcation at the customer premises,
offering Quality of Service and enhanced Bandwidth Control (rate-
limiting) capabilities. The 2GXM2 features built-in Operations,
Administration and Maintenance (OAM) with comprehensive
performance monitoring, fault detection and provisioning.
The 2GXM2 is available as a compact standalone unit or as a
chassis plug-in module. The hot-swappable 2GXM2 plug-in
module can be mounted in a 19 or 5-Module chassis with any
combination of redundant AC and DC power supplies. It can
also be mounted in a 2-Module AC or DC powered chassis, or
in a 1-Module chassis with AC or DC power input.
The plug-in module can manage other modules in the same
chassis and operate as a managed gigabit fiber-to-fiber converter.
It features two Gigabit Ethernet backplane ports for connectivity
to adjacent modules in a chassis for multi-port and multi-service
configurations.
The standalone 2GXM2 is available as a tabletop or wall-mount
unit. The tabletop model can be DIN-rail mounted using an
optional DIN-rail mounting kit. Both the tabletop and the
wall-mount models are DC powered and are available with an
external AC/DC power adapter or a terminal connector for DC
power. The 2GXM2 standalone unit combines management
capability with a compact chassis for deployment at the
demarcation point.
1000BASE-X SFP to 1000BASE-X SFP Media Converter and Network Interface Device
iConverter ® 2GXM2
„ Carrier-Grade optical Ethernet Network Interface Device
„ Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less
802.3ah management
„ 802.3ah Link OAM for early fault detection and
performance monitoring
„ VLAN with 802.1ad Q-in-Q for E-Line and E-LAN services
„ Quality of Service for Voice/Data/Video over Ethernet
„ Bandwidth control (rate limiting) with 64Kb increments
„ Port MIB statistics and optical performance statistics to
support Service Level Agreements
„ Port Access Control for enhanced security
„ 10,240 byte Jumbo frames
„ Layer 2 Control Protocol (L2CP) Policy Control
„ Configurable Link Fault Propagation modes
„ Small Form Pluggable (SFP) transceivers with Optical
Statistics for standard or CWDM applications
„ Auto-negotiation of duplex modes and pause capabilities
„ Commercial (0 to 50 O C), wide (-40 O to 60 O C) and
extended (-40 O to 75 O C) temperature ranges
„ MEF 9 and 14 Certified Compliant
„ NEBS Level 3 Compliant
„ Lifetime Warranty and free 24/7 Technical Support
iConverter fiber access Network Interface
Devices and media converters are MEF 9 and
14 certified compliant and NEBS Level 3
compliant.
iConverter NIDs enable
Carrier-Grade Optical Ethernet with reliability
and performance monitoring to support Service
Level Agreements (SLAs).
The modular design of iConverter fiber access
equipment future-proofs Metro Ethernet
services with scalability of network services
and lowers operating costs with
comprehensive OAM management and
provisioning.
iConverter iConverter
Tabletop Wall-Mount
Plug-in