Northern Connectors Harting D-sub Connectors, Housings & Accessories - Manual (Page 87)

05
86
D-Sub
HARTING customer request form for pcb connectors
1 Connector gender and type
■
Plug (male contacts)
■
Receptacle (female contacts)
2 Contact arrangement
Standard
■
2W2
■
7W7
■
13W6
■
25W3
■
3W3
■
8W8
■
17W2
■
27W2
■
5W1
■
9W4
■
21W1
■
36W4
■
5W5
■
11W1
■
21WA4
■
43W2
■
7W2
■
13W3
■
24W7
Special configurations
■
2W2C
■
3W3C
(mixed contact genders)
2.1 Any signal contacts?
■
Yes (fill in questions below)
■
No (go directly to item 2.2)
■
Right angled 2.54 mm pitch
■
Other pitch:
_______________________________________________________________________________________________________
2.2 Any power contacts?
■
Yes (fill in questions below)
■
No (go directly to item 2.3)
Current rating
■
10 A
■
30 A
■
20 A
■
40 A
Termination type
■
Solder pin for pcb
■
Press-in for pcb (30 A, straight version only)
Performance level
■
S4 [0.76 µm Au / 0.2 µm Au]
[mating side / termination side]
■
PL 3 [0.2 µm Au / 5.0 µm Sn]
2.3 Any coaxial contacts?
■
Yes (fill in questions below)
■
No (go directly to item 2.4)
Impedance
■
50 Ω
■
75 Ω
Performance level
■
S4 [1.3 µm Au / 0.76 µm Au]
[mating side inner / outer conductor]
■
PL 3 [0.2 µm Au / 0.2 µm Au]
2.4 Any high voltage contacts?
■
Yes
■
No (go directly to item 2.5)
2.5 Any pneumatic contacts?
■
Yes (fill in questions below)
■
No (go directly to item 3)
Tube inner diameter /
suitable compressed air tube
■
2 mm / PU-2
■
2.6 mm / PU-N4* 2.5
■
3 mm / PU-3
■
4 mm / PU-4
■
Straight
■
Right angled
D-Sub