Northern Connectors Harting D-sub Connectors, Housings & Accessories - Manual (Page 201)

05
200
D-Sub
9 09 18 009 70
15 09 18 015 70
25 09 18 025 70
37 09 18 037 70
9 09 18 009 70
15 09 18 015 70
25 09 18 025 70
37 09 18 037 70
* Not normally kept in stock
Important: always store reals vertically
No. of
Identification contacts Part No. Drawing Dimensions in mm
Round flat cable
with screening
(shielding)
UL listed PLCC CL2
CSA certified AWM FT-1
Length per reel
30.48 m
(100 feet) 07
100 m 10 *
(328 feet)
without screening
(shielding)
UL listed PLCC CL2
CSA certified AWM FT-1
Length per reel
30.48 m
(100 feet) 08
100 m 11 *
(328 feet)
➀ Flat cable, AWG 28/7
➁ Clear polyester
➂ Outer jacket: black PVC
No. of contacts a b c
9 to 25 19.05 19.05 38.10
37 38.10 19.05 57.15
➀ Flat cable, AWG 28/7
➁ Aluminium / Polyester tape (spiral wrap)
➂ 85 % minimum coverage tinned copper braid
➃ Outer jacket: black PVC
Edge mark on
first conductor
AWG 28/7 grey
Slit section
Slit section
6.35
6.86
8.38
9.65
ø max.
6.86
7.62
9.14
10.41
Conductor material _________________ Copper tinned
Gauge ___________________________ AWG 28/7 0.089 mm²
Voltage rating ______________________ 300 V
r.m.s.
Conductor resistance ________________ 225 mΩ/m
Capacity unbalanced ________________ 78.7 pF/m
Impedance unbalanced ______________ 75 Ω
Signal delay _______________________ 5.25 ns/m nom.
Insulation material __________________ PVC
Temperature rating _________________ –20 °C … +105 °C
Flammability rating _________________ UL: VW 1
Insulation resistance ________________ 10
4 MΩ/km
Cables for insulation displacement termination