Multiquip C30HD - Manual (Page 64)

PAGE 64 — C-30HD — PARTS & OPERATION MANUAL — REV. #4 (03/06/01)
C-30MG — SCALED DOWN MANIFOLD/CYLINDER KIT MODEL C-30MG
The above manifold/cylinder and piston assembly can be
ordered as a kit to be installed on model C-30K, C-30SP or
model C-30D pumps. This unit has a volume delivery of 4 to
13 cu. yds. per hour. When installed on a standard pump, the
unit will pump brick mortar as well as 1/2” minus aggregate
mixes in excess of 200 ft. vertical. It is a high pressure-low
volume pump for numerous applications such as high-rise
grouting-spancrete-mud jacking-capping wells-tunnel
grouting-pumping pilings and shotcrete.
Note: If the above assembly is installed on model C-30D pumps
it will be necessary to replace the compensator piston rod
assembly with the new style used on the model C-30K, and
model C-30 HD.