Trailer safety guidelines, Lights and signals – Multiquip WTE5C Operation Manual User Manual
Page 48
page 48 — WT5C/WTe5C WaTer Trailer • operaTion manual — rev. #1 (06/05/13)
Lights and Signals
Before each tow, check the trailer taillights, stoplights, turn
signals and any clearance lights for proper operation.
Table C. Tire Torque requirements
Wheel Size
First Pass
FT-lBS
Second Pass
FT-lBS
Third Pass
FT-lBS
12"
20-25
35-40
50-65
13"
20-25
35-40
50-65
14"
20-25
50-60
90-120
15"
20-25
50-60
90-120
16"
20-25
50-60
90-120
Replace any broken or burned-out lamps as necessary.
Check the wire harness for cuts, fraying or other damage.
If it needs replacing, contact your dealer.
Warning
Improper operating taillights, stoplights and turn signals
can cause collisions.
Check all lights before each tow.
Figure M. Trailer to Tow Vehicle Wiring Diagram
trailer safety guidelines
NOTICE
The WT5C and WTE5C come standard with a flat 4-pin
molded connector. The 6 and 7-pin connectors are
illustrated for your information.