MTS Landmark TWX - Manual (Page 109)

This is a safety precaution to take before nearing the crush zone. Note that turning the HSM off removes
power from the actuator, while leaving hydraulic power to the grips.
7. Release the lower grip and remove the specimen.
Using a tool that keeps your hands clear of the actuator, grasp the specimen and release the lower
grip. That completes this Example test.
If Appropriate, Remove the Broken Specimen
Use this procedure only if the specimen is broken at the conclusion of the test run. If the specimen is still
intact, see
If Appropriate, Remove the Intact Specimen (p. 107).
1. Select Exclusive Control.
2. If necessary, retract the actuator.
MTS Landmark Test System Operation | 109
Running the Example Tension Test