MTS Landmark TWX - Manual (Page 100)

Select the Test
Select the MTS SH Tension (Simplified) template.
In the MTS TWX main window, select MTS Templates > TW - Hydraulic > MTS SH Tension
(Simplified) to load the test.
Switch to Round Specimen Geometry
The MTS SH Tension (Simplified) test is set up for rectangular specimen geometry. Because this example
uses a round specimen, you will need to switch to round specimen geometry.
1. In the TWX main window, select Define > Variables.
100 | MTS Landmark Test System Operation
Running the Example Tension Test