MTS Series LX Laser Extensometer - Manual (Page 26)

LX Laser Extensometer
Labels and Warning Logotypes
Safety 26
Additional Safety Cautions
Besides the safety cautions listed on the previous page, you should read,
understand, and follow these additional safety cautions:
Before attempting to operate the instrument, read and understand the entire
manual. Follow all safety precautions and warning labels.
This instrument is a technical product for use only by skilled personnel in an
indoor laboratory environment with a normal, controlled, 25ºC, 55% relative
humidity. This instrument is not for outdoor use. Do not expose to moisture.
Properly handle and install this instrument on a stable, solid mounting surface
suitable for safely handling its weight and size. Failure to do so can present a
safety hazard and result in damage to the instrument. The instrument is not for
hand held use.
There are 170 user serviceable components inside the instrument. Do not attempt
to open or remove the case. Dangerous voltages and laser radiation are present
inside. Return the instrument to the factory for service.
Do not make any modifications to the instrument. Doing so will void the warranty
and can also result in a hazardous condition.
To reduce the risk of electrical shock, the instrument must be connected to the AC
Main power line using the proper, grounded 3-prong line cord.
Before performing any maintenance, turn the power switch to OFF position and
disconnect unit from the AC Main power line.
Replace fuses with only the specified type and rating. Using incorrect fuses can
present a safety hazard and damage the instrument.
CAUTION