MTS Isolation Service Manifold Controller - Manual (Page 17)

J3A/B Connectors
Isolation Service Manifold Controller Hardware Overview 17
J3A/B Connectors
Function
Channel A and B ISM control connector to provide connection to the ISM
Isolation and Bypass solenoids, Isolation valve position switch, and Isolation
output pressure switch.
Connector Type
Stacked D25S/D25S (reference cable 574745-XX)
Pin Outs/Electrical
specifications
Pin Description
1 Bypass Solenoid Control output.
Bypass solenoid control output.
2 Bypass Solenoid Control return.
Signal return for bypass solenoid control.
3 and 16 Isolation Solenoid Control output.
Isolation solenoid control output.
4 Isolation Solenoid Control return.
Signal return for Isolation solenoid control output
5 Isolation output pressure switch input.
Pressure switch connects between pin's 5 and 6 in
this connector.
6 Isolation output pressure switch power output power.
Provides power to pass through isolation output
pressure switch to isolation output pressure switch
input on pin 5.
7 Isolation valve position input.
Position switch connects between pin's 7 and 8 in
this connector.
8 Isolation valve position switch power output power.
Provides power to pass through isolation output
valve position switch to isolation output valve
position switch input on pin 7.
9 through 15,
17 through 25 Not used.