MTS Isolation Service Manifold Controller - Manual (Page 16)

Isolation Service Manifold Controller 16
J2A/B Connectors
Hardware Overview
J2A/B Connectors
Function
Channel A and B Pilot Pressure block control connector to provide connection to
the pilot pressure block pilot pressure control solenoid, pilot pressure valve
position switch, and pilot pressure output pressure switch.
Connector Type
Stacked D15S/D15S (reference cable 575142-XX)
Pin Outs/Electrical
specifications
7 HSM Low In.
HSM Low command input from an HSM controller
output.
8 HSM Low/Hi return.
Signal return path for HSM Low and Hi inputs.
9 HSM Proportional return.
Signal return path for HSM proportional input.
Pin Description
Pin Description
1 and 9 Pilot pressure Solenoid Control output.
Control for pilot pressure solenoid.
2 Pilot Pressure Solenoid Control return
Signal return for pilot pressure solenoid control.
5 Pilot Pressure output pressure switch input.
Pressure switch connects between pin's 5 and 6 in
this connector.
6 Pilot Pressure output pressure switch power output
power.
Provides power to pass through pilot pressure
output pressure switch to pilot pressure output
pressure switch input on pin 5.
7 Pilot Pressure valve position input.
Position switch connects between pin's 7 and 8 in
this connector.
8 Pilot Pressure valve position switch power output power.
Provides power to pass through pilot pressure valve
position switch to pilot pressure valve position
switch input on pin 7.
3, 4, 10, 11, 12,
13, 14, and 15 Not used.