MTS Series 642 Bend Fixtures - Manual (Page 34)

Series 642 Bend Fixtures Product Information 34 Installation
G. Tighten the four anti-rotate cap screws to a torque listed in the table
below.
The actuator force rating is stamped on an identification plate at the
rear of the load unit.
Anti-Rotate Cap Screw Torque
Actuator Force Rating Torque Rating
25 kN (5.5 kip) 3.7 N · m (2.7 lbf · ft)
50 to 250 kN (1 to 55 kip) 48 N · m (35 lbf · ft)
Tighten