MTS Advantage Pneumatic Grips User Manual
Page 56
Advantage™ Pneumatic Grips
Maintenance
56
Cleaning face surfaces
Periodically check the face surfaces for debris buildup. Clean them if necessary.
Face surfaces will wear out eventually and need to be replaced. Use only MTS
replacement parts. See
parts.
Do not use oil or alcohol based solvents or abrasive material to clean rubber
face surfaces.
Using oil or alcohol based solvents or abrasive material such as Scotch-Brite™ on
rubber face surfaces can cause product damage.
Rubber face surfaces should be cleaned using a clean soft cloth dampened with a
water based solvent. Do not use oil or alcohol based solvents or abrasive material
such as Scotch-Brite™.
Metal face surfaces can be cleaned using an oil or alcohol based solvent and a
soft wire brush. Be sure to brush parallel with the grooves.
Spare parts kits
The spare parts kits include seals, gaskets, washers and grip face pins and the
lubricant necessary for grip maintenance.
CAUTION
Model
MTS Part Number
10 N
100-044-618
200 N
100-044-616
2000 N
100-044-617
10,000 N
100-044-619
- Series 111 Accumulator (40 pages)
- Series 249G2 Swivels (34 pages)
- Series 201 Actuators (40 pages)
- Series 215 Rotary Actuator (68 pages)
- Series 242 Actuators (40 pages)
- Series 244 Actuators (68 pages)
- Series 247 Actuators (40 pages)
- Series 248 Actuators (46 pages)
- 709 Alignment System (158 pages)
- Series 609 Alignment Fixture (70 pages)
- 494 Controller Hardware FT 40 (344 pages)
- ReNew Technical Reference (50 pages)
- DCPD Measurement System (46 pages)
- Bionix EnviroBath (40 pages)
- FGW900 High-temperature Furnace (38 pages)
- Model 409.83 Temperature Controller (40 pages)
- Series 651 Environmental Chambers (30 pages)
- Series 653 High-Temperature Furnaces (38 pages)
- Series 658 Environmental Chamber (24 pages)
- Series FEC Environmental Chamber (48 pages)
- Model 685.53 Grip Control Module (24 pages)
- Series 685 Hydraulic Grip Supply (48 pages)
- Bend Fixture-10 kN (2 pages)
- Grip-Manual Bend Fixture-100 kN (2 pages)
- Grip-Manual Bollard-2 kN (2 pages)
- Grip-Manual Bollard-500 N (2 pages)
- Compression Platen-100 kN-100mm (2 pages)
- Compression Platen-100 kN-150mm (2 pages)
- Compression Platen-100 kN-200mm (2 pages)
- Compression Platen-20 kN (2 pages)
- Compression Platen-20 kN-100mm (2 pages)
- Compression Platen-20 kN-200mm (2 pages)
- Compression Platen-20 kN-SST (2 pages)
- Compression Platen-500 N FYC502A (2 pages)
- Compression Platen-500 N FYB502A (2 pages)
- Compression Platen-500 N-50mm (2 pages)
- Grip-Pneumatic Vise-Style-1 kN (2 pages)
- Pneumatic Bollard-500 N (2 pages)
- Scissor-Style-2 kN (2 pages)
- Scissor-Style-5 kN (2 pages)
- Screw-Style-5 kN (2 pages)
- Screw-Style-5 kN-SST (2 pages)
- Bend Fixture-1000 kN (2 pages)
- Bend Fixture-300 kN (2 pages)
- Bolt Grips (32 pages)