Foot pedal cable tension adjustment, Maintenance and storage – MotorGuide Tour Series User Manual
Page 31
MAINTENANCE AND STORAGE
eng
27
IMPORTANT: If the propeller cannot be removed easily, hold one
blade and use a rubber mallet to lightly tap the backside of the
opposite blade. If the propeller cannot be removed, refer to
Troubleshooting.
NOTE: If the propeller pin is bent, replace the propeller pin.
a -
Propeller pin
b -
Propeller
c -
Propeller nut
d -
Propeller wrench
Recommended MotorGuide Accessory
Description
Part Number
MotorGuide Prop Wrench Kit
MGA050B6
INSTALLING THE PROPELLER
1. Rotate the motor shaft to insert the propeller pin horizontally.
2. Install the propeller onto the motor shaft by engaging the
propeller onto the propeller pin.
3. Install the propeller nut. Tighten securely.
4. Use a MotorGuide propeller wrench or pliers to tighten the
propeller nut another ¼ turn.
Foot Pedal Cable Tension Adjustment
The foot pedal cable tension adjustment is correct when the
exposed number of threads on the tension adjustment shafts are
approximately the same and the amount of deflection of the long
exposed foot pedal cable under a 9.1 kilogram force (20 lbf) pull is
approximately 19 mm (3/4 in.).
a
b
c
d
45945