MotorGuide Tour Series - Manual (Page 21)

TROLLING MOTOR OPERATION
eng
17
Installing and Removing the Motor
41286
Bracket knob
1. To install the motor to the bow mount, turn the bracket knob
counterclockwise to loosen and open the bracket door.
2. Place the motor column into the bracket and close the door.
3. Turn the bracket knob clockwise to tighten the motor column
in the bracket.
REMOVING THE MOTOR
1. To remove the motor from the bow mount, turn the bracket
knob counterclockwise to loosen and open the bracket door.
2. Remove the motor column from the bracket and close the
door.
Connecting the Sonar Display to Motor
NOTE: This sonar display connection procedure applies to the
Tour Series motors that offer built‑in 200/83 kHz sonar transducers
compatible with Eagle ® , Garmin ® , Humminbird ® , Lowrance ® , and
Vexilar ® brand sonar displays. Tour sonar models connect with
Lowrance 7 pin sonar units. For compatibility with other sonar
units, refer to www.motorguide.com.