Product installation and operation, Cb a – MotorGuide Pinpoint GPS User Manual

Page 25

PRODUCT INSTALLATION AND OPERATION

eng

Adjusting Motor Speed

If heading lock mode is selected from manual mode, the trolling motor will run at the

last selected speed. The motor speed can be manually adjusted in heading lock

mode by pressing the increase speed (+) button or decrease speed (–) button. The

trolling motor will emit two beeps when the user tries to exceed the available motor

speed limits.

Adjusting the Heading

While in heading lock mode, the heading can be adjusted by pressing the left turn or
right turn

buttons on the handheld remote. The trolling motor will resume heading

lock navigation based on the new trolling motor heading.

OPERATING IN ROUTE MODE

Route mode has the ability to store and recall user‑defined routes. These routes can

be recorded and recalled by the user from any operating mode.

WARNING

Avoid serious injury from colliding with other boats, running aground, or striking

objects in the water. The Pinpoint GPS system cannot detect other boats, shallow

water, or objects in the water. Always beware of possible obstructions to navigation

when operating in any Pinpoint GPS mode.

a -

Memory buttons (1–8)

b -

Route playback

c -

Route record

53021