MotorGuide Pinpoint GPS - Manual (Page 13)

PRODUCT INSTALLATION AND OPERATION
eng
7
Remove the plastic plug, and route the GPS cable through the opening in
the trolling motor base.
a - Status light indicator
panel
b - Status light harness
c - NMEA cable
d - Female GPS
connector
e - Male GPS connector
f - Lower GPS module
g - GPS cable
10. Install the status indicator light panel. Ensure that no wires are pinched between
the status indicator light panel and the trolling motor, and that the GPS cable is
positioned as shown.
a - Status indicator light
panel
b - GPS cable
a
b
f
g
53470
d
c
e
a
b
54438