MotorGuide Pinpoint GPS - Manual

eng
i
FCC and IC Compliance Statement
PINPOINT KEY FOB, FCC ID ‑ MVU10148
ACMA: N2523
IC: 6094A‑09291, 6094A‑09305
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference
that may cause undesired operation.
This device complies with FCC Rules. Changes or modifications not expressly
approved by MotorGuide could void the user's authority to operate the
equipment.
The MotorGuide Pinpoint GPS System complies with Industry Canada RSS‑210
standard. See RSS‑GEN 7.1.5. The term "IC:" before the certification/
registration number only signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical
specifications were met. The term "IC:" before the certification/registration
number does not imply that Industry Canada approved the equipment.
EU Compliance Statement
Attwood Corporation hereby declares that the Motorguide Pinpoint GPS System
is in compliance with the essential requirements and other relevant provisions of
the 99/5/EC R&TTE directive.
A copy of the original CE Declaration of Conformity is on our website at http://
www.motorguide.com/support/certifications.
Environmental Compliance Statement
All MotorGuide products that are subject to the 2002/96/EC WEEE directive are
compliant with the WEEE marking requirement. Such products are marked with
the "crossed‑out wheelie bin" WEEE symbol (shown, below) in accordance with
European Standard EN50419.
54539
© 2013 Mercury Marine
Pinpoint GPS
90-8M0086988 1213