MK Diamond MK-101 Pro24 User Manual
Page 15
15
UNIVERSAL STAND
CAUTION
TRANSPORT
The MK-101 is designed with a rigid frame and
removable Cutting Head. Two people are required
to transport the MK-101 with the Cutting Head in-
stalled. Remove the Cutting Head if one person is
transporting the saw (see Cutting Head Installation
and Removal in the following section).
Lift Point
Lift Point
Lift the saw using the
lift points shown.
1. The MK-101 weighs approximately one hundred and thirty (130) pounds.
2. Never transport the MK-101 with water in the Water Basin.
The MK-101 Pro24 weighs approximately one hundred and thirty (130) pounds;
follow the guidelines for transport in the TRANSPORT section, when placing it on
the stand.
MK-101 Pro24
TRANSPORT
(C)
Ensure saw frame is posi-
tioned correctly
(D)
Reinstall the Water Basin
(A)
Open the Stand and place on
flat surface
(B)
Remove Water Basin and
place saw on stand