Brada Appliances MPN1-08CR - Manual (Page 23)

REMOTE CONTROLLER ILLUSTRATION
To set the Auto-off time.
1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the
last Auto-off setting time and the signal "h" will be shown on the LCD display
area. Now it is ready to reset the Auto-off time to START the operation.
2. Push the TIMER OFF button again to set desired Auto-off time. Each time
you press the button, the time increases in 30 minutes increments, up to 10
hours, then at 1 hour increments up to 24 hours.
3. After setting the TIMER OFF ,there will be a one-half second delay before the
remote controller transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" will disappear and the set
temperature will re-appear on the LCD display window.
1
TEMP
AUTO
COOL
DRY FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON ECONOMY
ON/OFF
TIMER OFF RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
TIMER OFF
The effective operation time set by the remote controller for the timer function is limited to the following settings:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,
17, 18, 19, 20, 21, 22, 23 and 24.
IMPORTANT
Example of Timer setting
TIMER ON
Start
Off
6 hours later
(Auto-on Operation)
The TIMER ON feature is useful when you want the unit to turn on automatically
before say when you return home. The air conditioner will automatically start
operating at the set time.
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of starting operation time and the
signal
2. Press the TIMER ON button to display "6:0 h" on the TIMER ON display of the
remote controller.
3.
"h" will show on the display area.
Wait for 0.5 second and the TIMER ON indicator stops flashing and this function
is activated. The digital display area will show the tempera ture again.
TIMER ON
Example:
h
Set
TIMER OFF
Stop
On
Set 10 hours later
(Auto-off Operation)
The TIMER OFF feature is useful when you want the unit to turn off automatically
after you go to bed. The air conditioner will stop automatically at the set time.
To stop the air conditioner in 10 hours.
1. Press the TIMER OFF button, the last setting of stopping operation time and
the signal "h" will show on the display area.
2. Press the TIMER OFF button to display "10h" on the TIMER OFF display of the
remote controller.
3. Wait for 0.5 second and the TIMER OFF indicator stops flashing and this function
is activated. The digital display area will show the temperature again.
TIMER OFF
Example:
h
22