Brada Appliances MPN1-08CR - Manual (Page 20)

REMOTE CONTROLLER ILLUSTRATION
TIMER ON Button 8
Press this button to activate the Auto-on time setting. Each press will
increase the time setting in 30 minutes increments, up to 10 hours, then
at 1 hour increments up to 24 hours. To cancel the Auto-on time setting,
just press the button until the time setting is 0.0.
9 ECONOMY(SLEEP) Button
Select this function during the sleeping time. It can maintain the most
comfortable temperature and save energy. This function is available on
COOL or AUTO mode only .
Function buttons continued
Model: R51I13/BG(C)E
TEMP
AUTO
COOL
DRY FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
1 2
4
3
6
5
7
8
9
10
11
SET TEMPERATURE( F)
LED
DISPLAY
12
TIMRT OFF Button
LOCK Button
NOTE: While the unit is running under Energy-saving mode, it would be
cancelled if any other buttons are pressed.
10
Press this button to activate the Auto-off time setting. Each press will
increase the time setting in 30 minutes increments, up to 10 hours, then
at 1 hour increments up to 24 hours. To cancel the Auto-off time setting,
just press the button until the time setting is 0.0.
11
Press this recessed button to lock all current settings, and the remote
controller will not accept any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings from being changed
accidentally. Press the LOCK button again to cancel the LOCK function.
A lock symbol will appear on the remote controller display when the lock
function is activated.
Press this button to clear the display on the indoor unit, press it again to
light the display .
LED Display Button 12
TIMER ON OFF
SET TEMPERATURE
Transmission Indicator
Temp./Timer display
FAN SPEED display
MODE display
ON/OFF display
This transmission indicator will light when remote controller transmits signals to the indoor
unit.
Displays the current selected mode. Including AUTO, COOL, DRY, and FAN.
The temperature setting (from 17 C(62 F) to 30 C(88 F)) or timer setting (0~24h) will be
displayed. If FAN mode is selected, there will be no display. O O O O
This indicator will be displayed when the unit is operating.
Displays the selected fan speed: AUTO, HIGH, when the
fan speed is selected in AUTO speed. When AUTO or DRY Mode is selected, there will be
no signals displayed.
MED and LOW. Nothing displays
This display area shows the settings of the TIMER. That is, if only the Auto-on time function
is set, it will display TIMER ON. If only the Auto-off time function is set, it will display TIMER
OFF. If both functions are set, it will display TIMER ON OFF which indicates you have
chosen both the Auto-on time and Auto-off time.
LOCK display is displayed when pushing the LOCK button. Push the LOCK button to clear
display.
MODE display(FAN mode)
TIMER display
LOCK Indicator
Indicators on LCD
19