Brada Appliances MPN1-08CR - Manual (Page 21)

REMOTE CONTROLLER ILLUSTRATION
Cooling /Fan operation
MODE
TEMP
FAN SPEED
ON/OFF
Ensure the unit is plugged in and power is available.
1. Press the
button to select COOL, or FAN mode.
2. Press the button to set the desired temperature. The temperature
can be set within a range of
3. Press the button to select the fan speed in four steps- AUTO,
LOW, MED,or HIGH.
4. Press the button to start the air conditioner.
17 C(62 F)~ 30 C in 1 C(2 F) increments.
In the FAN mode, the setting temperature is not displayed in the remote controller and you
are not able to control the room temperature either. In this case, only step 1, 3 and 4 may
be performed.
NOTE
How to use the buttons
Auto operation
MODE
TEMP
ON/OFF
Ensure the unit is plugged in and power is available. The OPERATION
indicator on the display panel of the indoor unit illuminates.
1. Press the
button to select AUTO.
2. Press the button to set the desired temperature. The temperature
can be set within a range of 17 C(62 F)~ 30 C in 1 C(2 F) increments.
3. Press the
button to start the air conditioner.
3
1
2
1. In the AUTO mode, the air conditioner can logically choose the mode of Cooling, Fan,
and Dehumidifying by sensing the difference between the actual ambient room
temperature and the set temperature on the remote controller.
2. In the AUTO mode, you can not switch the fan speed. It has already been automatically
controlled.
3. If the AUTO mode is not comfortable for you, the desired mode can be selected manually.
NOTE
TEMP
AUTO
COOL
DRY FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON ECONOMY
ON/OFF
TIMER OFF RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
4
3 1
2
TEMP
AUTO
COOL
DRY FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON ECONOMY
ON/OFF
TIMER OFF RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
Dehumidifying operation
MODE
TEMP
ON/OFF
Ensure the unit is plugged in and power is available. The OPERATION
indicator on the display panel of the indoor unit illuminates.
1. Press the
button to select DRY mode.
2. Press the button to set the desired temperature. The temperature
can be set within a range of increments.
3. Press the button to start the air conditioner.
17 C(62 F)~ 30 C in 1 C(2 F)
In the Dehumidifying mode, you can not switch the fan speed. It has already been
automatically controlled.
NOTE
3
1
2
TEMP
AUTO
COOL
DRY FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON ECONOMY
ON/OFF
TIMER OFF RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
20