Brada Appliances MPN1-08CR - Manual (Page 10)

OPERATING INSTRUCTIONS
1 COOL OPERATION
- Press the "MODE" button several times until the "COOL" indicator light comes on.
- Press the UP and DOWN buttons or to select your desired room temperature.
The temperature can be set within a range of 17 C-30 C/62 F-88 F.
- Press the "FAN " button to choose the fan speed.
O O O O
3 FAN OPERATION
- Press the "MODE" button until the "FAN " indicator light comes on.
- Press the "FAN button to choose the fan speed. The temperature can not be adjusted.
- Do not put the duct to window.
"
OPERATING INSTRUCTIONS
4 AUTO OPERATION
- Press the "MODE" button until the "AUTO " indicator light comes on.
- Under this mode, you can not select a fan speed. The fan motor operates at Auto fan
speed. The temperature can be set within a range of 17 C-30 C/62 F-88 F. O O O O
- Press the "MODE" button until the "DRY" indicator light comes on.
- Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor
operates at LOW speed.
- Keep windows and doors closed for the best dehumidifying effect.
- Do not put the duct to window.
2 DRY OPERATION (DEHUMIDIFY)
5 TIMER OPERATION
Press the TIMER button can set the auto-on/off time of the unit.
- When the unit is on, first press the Timer button , the TIMER OFF indicator light
illuminates. It indicates the Auto Stop program is initiated.
-
- Press or hold the UP or DOWN button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
- The selected time will register in 5 second and the system will automatically revert
back to display the previous temperature setting.
- Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel
the Auto Start/Stop timed program.
- When the malfunction (E1, E2 or E4) occurs, the Auto Start/Stop timed program will
also be cancelled.
When the unit is off, first press the Timer button , the TIMER ON indicator light
illuminates. It indicates the Auto Start program is initiated.
9