Brada Appliances MPN1-08CR - Manual (Page 19)

REMOTE CONTROLLER ILLUSTRATION
Model
Lowest Voltage of
CPU Emitting Signal
Rated Voltage
R51I13/BG(C)E
-5 C 60 C( )
¡£ ¡£
8m (when using 3.0 voltage, it Gets 11m)
3.0V(Dry batteries R03/LR03 2)
2.0V
¡Á
~
Remote Controller Specifications
1. Operating Mode: AUTO, COOL, DRY, and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17 C~30 C(62 F~88 F).
4. Full function of LCD (Liquid Crystal Display)
5. Back light emitting.
¡£ ¡£
O O
Environment
Signal Receiving
Range
Performance Feature
-41 F~140 F O O
NOTE:
Temperature setting display: Fahrenheit scale( F), R51I13/BG(C)E
Function buttons
1
TEMP UP Button
Push this button to increase the indoor temperature setting in 1 C(2 F)
increments to 30 C(88 F).
o
o
2
TEMP DOWN Button
Push this button to decrease the indoor temperature setting in 1 C(2 F)
increments to 17 C(62 F).
o
o
Model: R51I13/BG(C)E
Each time the button is pressed, the operation mode is selected in the
sequence of the following:
3 MODE Button TEMP
AUTO
COOL
DRY FAN
HIGH
MED
LOW
MODE FAN SPEED
SWING TIMER ON ECONOMY
ON/OFF
TIMER OFF RESET LOCK
1 2
4
3
6
5
7
8
9
10
11
SET TEMPERATURE( F)
LED
DISPLAY
4 SWING Button
Used to stop or start louver movement and set the desired up/down
airflow direction.
5 RESET Button
Once the recessed RESET button is pressed, all of the current settings
will be cancelled and the controller will return to the initial settings.
AUTO COOL DRY FAN
12
6
7
ON/OFF Button
Operation starts when this button is pressed and stops when the button
is pressed again.
Used to select the fan speed in four steps:
Auto Low Med High
FAN SPEED Button
18