Lightforce PRED9X FIREARM MOUNTED LIGHT User Manual
Page 17

16
EXTERNAL POWER PACK
The PRED9X can be powered from an external power source via the rear power input socket.
Currently Lightforce do not offer a matching external power pack nor is the input plug supplied.
FILTERS
Optional red and green filters are supplied with the PRED9X kits. Take care, do not over tighten or
cross thread the filter. To fit:
1.
Squeeze the sides of the protective case and pull away from the base to expose the filter.
2.
Hold the filter parallel to the end of the PRED9X lens with the threaded edge facing the
glass of the lens.
3.
Place the filter flat against the lens.
4.
Twist the filter clockwise to tighten it onto the lens.
CAUTION: The maximum input voltage is 8.40 volts, the PRED9X is not intended for use
directly from a 12V battery.
Lightforce PREDX User Manual