Lightforce PRED9X FIREARM MOUNTED LIGHT - Manual (Page 16)

15
OPTIONAL EQUIPMENT
EXTRA RF CONTROLLERS
These can be added to control the PRED9X. A maximum of twenty (20) RF fobs can be paired with
a light. To pair a RF fob for the first time:
1. Turn the PRED9X LED on to HIGH or LOW mode.
2. Press and HOLD the momentary switch for 15-18 seconds until the LED switches OFF. The
indicator LED in the centre of the switch will shine RED to indicate that the light is in learn
mode and is ready to be paired with another RF fob.
3. While the RED indicator LED is shining, press the button on the RF fob. The unit is ready
for use.
4. To test that the unit is operating correctly, press the button on the RF fob. It should toggle
the PRED9X between HIGH and OFF (standby).