3 update, Of the runtime software, Update – Lenze Backup + Restore__Backup+Restore (PC-based) User Manual

Page 31

1.6 EN - 01/2011

Control technology | IPC Backup & Restore

Operation

Backup & Restore with a USB stick

4.2.3

Update

This function serves to prepare a USB stick for a software update of an industrial PC by

transferring the required software update to the USB stick.



The stored software update from the USB stick can then be installed on the CF card of

the industrial PC.



For the control of the update process in the industrial PC the control file is additionally

written to the USB stick.



Note!

• The storage medium selected in »IPC Backup & Restore« must correspond to

the storage medium physically available!

• The selection of faulty configuration data may cause maloperation when the

system is started! A software update only works perfectly with the software

provided by Lenze.

• The Lenze software and operating system can only be updated with a USB

stick! The USB stick must be formatted as FAT 16 file system!