Lenze EPM-H312 - Manual (Page 38)

Preface and general information
About these Operating Instructions
1
38 EDBPM-H312 DE/EN/FR 2.0
1 Preface and general information
This EPM-H312 operating unit enables you to access codes of Lenze controllers and
to control them easily. Communication takes places via the system bus (CAN).
BymeansoftheLenze software»HMI Designer«the programmingof theoperating
unit is easily achieved.
1.1 About these Operating Instructions
ƒ These Operating Instructions describe safe and trouble-free working on and
with the EPM-H312 operating unit.
ƒ All persons working on and with the EPM-H312 operating unit must have
these Operating Instructions available and observe all relevant information
and notes.
ƒ These Operating Instructions must always be kept as a complete document
and in a readable state.
1.2 Terminology used
Term Used in this text for
Drive controller Lenze frequency inverter 8200 vector and 9300 vector, servo inverter
9300 and 9400
HMI Human Machine Interface
1.3 Scope of supply
Quantity Important
1 operating unit EPM-H312 After receipt of the delivery, check immediately whether
th it d li d t h th i
ope at g u t 3
1 Operating Instructions
2 mounting clamps
te ece pt o t e de e y, c ec ed ate y et e
the items delivered match the accompanying papers.
Lenze does not accept any liability for deficiencies 2 mounting clamps
2 screws M4 × 35 mm
Lenze does not accept any liability for deficiencies
claimed subsequently.
2 screws M4 × 35 mm
1 seal
claimed subsequently.
Claim
visible transport damage immediately to the
1 seal
1 4-pole terminal strip for connection of DC
voltage supply
visible transport damage immediately to the
forwarder. voltage supply
1 terminal strip 5 pol. for system bus (CAN)
forwarder.
visible deficiencies/incompleteness immediately to
i
1 terminal strip 5 pol. for system bus (CAN)
connection
visible deficiencies/incompleteness immediately to
your Lenze representative.