Lenze EMF2141IB - Manual (Page 49)

Parameter setting
6-27
L
BA2141 EN 1.0
6.4.2.11 Receive heartbeat for AIF-CTRL
network input config SNVT_state nciAIFRecHrtBt;
Here you can select the manufacturer-specific network variables ( nviAIFStw , nviAIFIn1 ,
nviAIFIn2 , nviAIFIn3 ) which are to be monitored with a Receive Timeout .
nciAIFRecHrtBt.bit0 = 0 – No timeout monitoring for nviAIFStw
nciAIFRecHrtBt.bit0 = 1 – Timeout monitoring for nviAIFStw
nciAIFRecHrtBt.bit1 = 0 – No timeout monitoring for nviAIFIn1
nciAIFRecHrtBt.bit1 = 1 – Timeout monitoring for nviAIFIn1
nciAIFRecHrtBt.bit2 = 0 – No timeout monitoring for nviAIFIn2
nciAIFRecHrtBt.bit2 = 1 – Timeout monitoring for nviAIFIn2
nciAIFRecHrtBt.bit3 = 0 – No timeout monitoring for nviAIFIn3
nciAIFRecHrtBt.bit3 = 1 – Timeout monitoring for nviAIFIn3
If one of the monitored variables gets a Receive Heartbeat Timeout , the function selected in
nciAIFDefStw will be carried out.
Input range
The possible range for the input variable is 0 or 1 for every bit.
Only bits 0 and 3 will be evaluated.
Standard value
0
Show/Hide Bookmarks