Lenze DDS Function library 9300 Servo - Manual (Page 2)

The function library Lenze9300Servo.lib can be used for the following Lenze PLCs:
Type from hardware version from software version
9300 Servo PLC EVS93XX−xI 2K 10
9300 Servo PLC EVS93XX−xT 2K 10
ECSxA ECSxAxxx 1C 7.0
Important Note :
The software is made available to the user in the currently existing form. All risks with regard to the quality and the results arising from its
use remain the responsibility of the user. The user must implement the appropriate security precautions against possible erroneous
application.
We do not accept any responsibilty for direct or consequential damages, such as loss of profits, loss of orders, or effects on the course of
business of any kind.
E 2000 Lenze GmbH & Co KG
No part of this documentation may be copied or made available to third parties without the express written permission of
Lenze GmbH & Co KG.
We have take great care in assembling the information in this documentation, and checked that it corresponds to the hardware and software
that is described. Nevertheless, we cannot guarantee that there are no discrepancies. We do not accept any legal responsibility or liability
for damage that may thereby ensue. Any necessary corrections will be implemented in subsequent versions.
Windows, Windows NT and MS−DOS are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
IBM and VGA are registered trademarks of International Business Machines, Inc.
All other designations are trade names of their owners.
Version 1.1 08/2000 − TD22