Leica Biosystems ST4020 - Manual (Page 9)

9 Leica ST4020
Hazards – working with the instrument
The instrument may be operated by trained laboratory personnel only. It must only be
operated for the purpose of its designated use and according to the instructions con-
tained in this manual.
In the event of an emergency, switch off the power switch and unplug the instrument
from the power supply.
The instrument must be positioned so that the connection socket and the power switch
are easily accessible at all times.
The power supply cord must be routed so that it is not likely to be walked on or pinched
by items placed on or against it.
Suitable protective clothing (lab coat, gloves, protective goggles) must be worn when
working with reagents.
There is a danger of fire if a open flame (e.g. Bunsen burner) is used directly beside the
instrument (solvent fumes). Therefore, keep all ignition sources at least 2 meters away
from the instrument!
While the stainer is not in use, keep the reagent containers covered with the Reagent
Cover provided with the stainer.
2. Safety
Hazards – cleaning and maintenance
Before any maintenance, switch off the instrument and unplug it from power supply.
When using cleaners, please comply with the safety instructions of the manufacturer and
the laboratory safety regulations.
Do not use any of the following for cleaning the outside surfaces of the instrument: alco-
hol, detergents containing alcohol (glass cleaners), abrasive cleaning powders, solvents
containing acetone, chlorine or xylene!
Clean the Hood and the housing with commercial mild household cleaning agents. The
finished surfaces are not resistant to solvents!
Prevent liquids from entering the interior of the instrument while the instrument is being
cleaned or during operation.
Do not use any attachments or accessories not recommended by the product manufac-
turer as such attachments and accessories may cause hazards, damage the instrument
and void the warranty.