Leica Biosystems ST4020 User Manual
Leica st4020, Small linear stainer
Table of contents
Document Outline
- 1. Important Information
- 2. Safety
- 2.1 Safety notes
- 2.2 Warnings
- 3. Instrument Components and Specifications
- 3.1 Overview - Instrument Parts
- 3.2 Instrument specifications
- 3.3 Functional Description of Components - System overview
- 3.3 Functional Areas of the Slide Carrier
- 3.4 Standard delivery
- 3.5 Technical Data
- 4. Setting Up the Instrument
- 4.1 Location Conditions
- 4.2 Unpacking the Instrument
- 4.3 Setup
- 4.4 Water Connection
- 4.5 Installing the Rinsing Water Containers
- 4.6 Remedy if hose is too short
- 5. Operation
- 5.1 Switching on the Instrument
- 5.2 Control Panel Functions
- 5.3 Setting the Operating Parameters
- 5.4 Setting the Rinsing Water Flow Rate
- 5.5 Processing Slides
- 5.5.1 Starting a staining run
- 5.5.2 Adding more slide carriers during a staining run
- 5.5.3 Temporarily pausing a staining run
- 5.5.4 Ending a staining run prematurely
- 5.5.5 Removing Processed Slides
- 6. Cleaning and Maintenance
- 6.1 Cleaning the Instrument
- 6.2 Maintenance Instructions
- 7. Troubleshooting
- 7.1 General
- 7.2 Alarms
- 7.3 Fault Detection and Correction List
- 7.4 Power Failure
- 8. Optional accessories
- 8.1 Ordering information
- 9. Warranty and service