Leica Biosystems ST4020 - Manual (Page 37)

37 Leica ST4020
Of course, there will be times when slides are being removed but no additional slides are being
loaded.
Removing Processed Slides (continued)
These two different situations are handled in the following ways:
1 To remove processed slides only:
• Take ALL of the slide carriers out of the instrument's exit
tank.
• Press the RUN key once to start processing the loaded slide
carriers.
2. To remove the carriers with stained slides and load fresh
slide carriers:
• Press the PAUSE/STOP key once.
• Wait until the system prompts you to load the slides and
press the RUN key.
• Place the new slide carriers in the system.
• Press the RUN key once.
• Remove ALL the slides from the exit tank.
5. Operation