Belkin Vision Wireless Router N1 - Manual (Page 99)

95 94 95 94
Troubleshooting
se
ct
io
n
1
9
2
3
4
5
6
7
8
10
I can’t connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless computer,
please check the following items:
1.
Look at the lights on your N1 Vision. They should be as follows:
• The “router” icon should be on.
• The “radio wave” icon above the “router” icon should be on.
• The “modem” light should be on, and not blinking.
• The “internet” icon should be on, and not blinking.
• The “Wireless” light should be on, not blinking.
2.
Open your wireless utility software by clicking on the icon in the
system tray at the bottom, right-hand corner of the screen.
3.
The exact window that opens will vary depending on the model of
wireless card you have; however, any of the utilities should have
a list of “Available Networks”—those wireless networks it can
connect to.
Does the name of your wireless network appear in the results?
Yes, my network name is listed—go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, but my network name
is listed”.
No, my network name is not listed—go to the troubleshooting solution
titled “I can’t connect to the Internet wirelessly, and my network name
is not listed”.