Belkin Vision Wireless Router N1 - Manual (Page 34)

31 30
Alternate Setup Method
31 30
Step 1 Hardware Connections – Follow the
Quick Installation Guide (QIG)
See the QIG or Step 1: Hardware Connections from the
previous section.
Step 2 Set your Computer’s Network Settings to Work
with a DHCP Server
See the section in this User Manual called “Manually Configuring
Network Settings” for directions.
Step 3 Configuring the N1 Vision Using the Web-Based Ad-
vanced User Interface
Using your Internet browser, you can access the N1 Vision’s
Web-Based Advanced User Interface. In your browser, type
“192.168.2.1” (do not type in anything else such as “http://” or
“www”). Then press the “Enter” key.