Belkin Vision Wireless Router N1 - Manual (Page 70)

67 66
Using the Web-Based Advanced User Interface
67 66
Setting Client IP Filters
The N1 Vision can be configured to restrict access to the Internet,
e-mail, or other network services at specific days and times.
Restriction can be set for a single computer, a range of computers,
or multiple computers.
To restrict Internet access to a single computer for example, enter
the IP address of the computer you wish to restrict access to in the
IP fields
(1)
. Next, enter “80” in both the port fields
(2)
. Select “Both”
(3) . Select “Block” (4) . You can also select “Always” to block access
all of the time. Select the day to start on top
(5)
, the time to start on
top
(6)
, the day to end on the bottom
(7)
, and the time to stop
(8)
on
the bottom. Select “Enable”
(9).
Click “Apply Changes”. The computer
at the IP address you specified will now be blocked from Internet
access at the times you specified. Note: Be sure you have selected the
correct time zone under “Utilities> System Settings> Time Zone”.
(1) (2) (3) (4) (7) (8) (9)
(5) (6)