Belkin Vision Wireless Router N1 - Manual (Page 47)

43 42 43 42
Alternate Setup Method
se
ct
io
n
1
9
2
3
4
5
6
7
8
10
4. User Decide Login Server Manually
If your login server IP address is not available in the “Select Your
State” drop-down menu
(1)
, you may manually enter the login
server IP address by placing a check in the box next to “User
decide login server manually” and type in the address next to
“Login Server”
(5)
.
Setting Custom Domain Name Server (DNS) Settings
A “Domain Name Server” is a server located on the Internet that translates
Universal Resource Locaters (URLs) like “www.belkin.com” to IP addresses.
Many Internet Service Providers (ISPs) do not require you to enter this
information into the N1 Vision. The “Automatic from ISP” box
(1)
should
be checked if your ISP did not give you a specific DNS address. If you are
using a static IP connection type, then you may need to enter a specific
DNS address and secondary DNS address for your connection to work
properly. If your connection type is dynamic or PPPoE, it is likely that you
do not have to enter a DNS address. Leave the “Automatic from ISP” box
checked. To enter the DNS address settings, uncheck the “Automatic from
ISP” box and enter your DNS entries in the spaces provided. Click “Apply
Changes”
(2)
to save the settings.
(1)
(2)