Safety and design, 1 safety notes, 2 warnings – Leica Biosystems CM1950 User Manual
Page 8: Safety notes

8
Instructions for Use V 1.5 RevF - 08/2014
2.1 Safety notes
These Instructions for Use include important
instructions and information related to the oper-
ating safety and maintenance of the instrument.
The Instructions for Use are an important part of
the product, and must be read carefully prior to
startup and use and must always be kept near
the instrument.
This instrument has been built and tested in
accordance with the safety requirements for
electrical equipment for measurement, control,
and laboratory use.
2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis
for accident prevention. Operating the instrument safely is, above all, the responsibility of the
owner, as well as the designated personnel who operate, service or repair the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
To maintain this condition and ensure safe
operation, the user must observe all notes and
warnings contained in these Instructions for Use.
2.
Safety and Design
The safety and caution notes in this chapter must be observed at all times.
Be sure to read these notes even if you are already familiar with the operation and use of other
Leica products.
For the CE certificate and up-to-date
certificates pertaining to UV disinfec-
tion, visit us online at:
www.LeicaBiosystems.com.
These Instructions for Use must be appropriately supplemented as required by the existing reg-
ulations on accident prevention and environmental safety in the operator‘s country.
The protective devices located on the instrument and the accessories must not be removed or
modified. The instrument must only be opened and repaired by service technicians authorized
by Leica.
Only original spare parts and permitted original accessories may be used!
Use only the provided power cable - this must not be replaced with a different power cable!
If the power plug does not fit in the socket, then contact our service.