Landoll CPPS2-7 TWO-BAR PICK-UP Chisel Plow - Manual (Page 7)

1273rev701 9D990
WEIGHTS
(Weights Less Gauge Basic unit Less Shanks
Wheels and Shank Points) and Gauge Wheel Kit .......................... 260#
CPPR2-5 ............................................. 455# 9D-986 Gauge Wheel
Kit Less Tires ...................................... 122#
CPPS2-5 ............................................. 590# .....................................................................
RC-26 Rigid
CPPR2-7 ............................................. 533# Shank Assembly .................................... 39#
SC-26 Spring Type
CPPS2-7 ............................................. 722# Shank Assembly .................................... 66#
OPTIONAL EQUIPMENT
9D986 Gauge Wheel Kit (less tires)
9D991 Box of 5 - 5/8" x 2 x 15" Chisel Points
9D993 Box of 5 - 3/8" x 3 x 19 1/2" Twisted Shovels
6D759 Box of 7 - 5/8" x 2 x 15" Chisel Points
6D763 Box of 7 - 3/8" x 2 x 19 1/2" Twisted Shovels
MAINTENANCE
After the first five or six hours of operation, go over the machine and tighten all nuts which might be
loose. Normal periodic checks should be made thereafter.
For the shanks with a spring cushion clamp, grease the pivot pin every 10 hours under normal
operating conditions.
Gauge wheel bearings should be packed once a season.
PARTS ORDERING
When ordering parts for this machine, be sure to include the complete model number and serial
number. These numbers are stamped on a name plate located on the inner side of the right front-
to-back tube. Please read and record this number upon taking delivery of the machine.
Chisel Plow Model
Serial Number
Date Purchased
Be sure to read the warrinty card which is shipped with this machine. Return the proper portion of
the warranty card so that your machine identificaiton number will be recorded.
3 A3
Page 5