Landoll XXLO184 X-Fold Pulverizer - Manual (Page 35)

190rev501 9J698 Page 24
Machine Specifications
Frame .................................................................................Center - two 4" x 4" x 5/16" Wall Tubing
Wings - 5" x 5" x 3/16" Wall Tubing
Drawbar - two 3" x 6" x 3/126" Wall Tubing
-
6" x 6" x 3/16" Wall Tubing
Braces - 3" x 6" x 3/16" Wall Tubing
Hitch Weight - Transport with drawbar telescoped ...................................................................... 760 lbs
- Field Position .................................................................................................... 275 lbs
Hydraulics ..................................................................................................... Two 4" x 3 0" Wing cylinders
One 4" x 24" Transport axle cylinder
(Single tractor system operates both wing and axle cylinders)
Recommended Horsepower ................................................ Approximately 1+ H.P. per foot of rolling width
Machine Weights:
XXL184 - 4308 lbs XXLC184 - 4288 lbs
XXLW136 - 3183 lbs XXLWC136 - 3131 lbs
XXLW148 - 3389 lbs XXLWC148 - 3417 lbs
XXLW160 - 3599 lbs XXLWC160 - 3551 lbs
XXLW172 - 3809 lbs XXLWC172 - 3843 lbs
XXLW184 - 4020 lbs XXLWC184 - 3980 lbs
Options
9J305 - XXL184 Center Scraper Kit ..............................................................................................133 lbs
9J306 - XXLW136 Wing Scraper Kit (38') ...................................................................................... 213 lbs
9J307 - XXLW148 Wing Scraper Kit (40') ...................................................................................... 228 lbs
9J308 - XXLW160 Wing Scraper Kit (42') ...................................................................................... 244 lbs
9J309 - XXLW172 Wing Scraper Kit (44') ...................................................................................... 260 lbs
9J310 - XXLW184 Wing Scraper Kit (46') ...................................................................................... 276 lbs
6J194 - Manual Valve Control .......................................................................................................... 6 lbs
(allows wings to be preset to a given height)
Safety Chain: 10,100#
Use of a safety chain is recommended if machines are towed on a public road or highway. Total weight of
towed machine must not exceed chain capacity as shown on the identification tag. If two or more machines are
pulled in tandem, a larger chain may be required. See diagram for installation guidance (all of the hardware
shown may not be used).
Slack in the chain should
be only enough to permit
turning. Distance from
hitch pin to attachment
point or intermediate
support should not exceed
9". See safety chain
instructions supplied with
chain for photographic
illustrations of typical
attachment to tractor.
Stover Nut, 1-8NC
Flat Washer, 1”
Chain
Capscrew,
1-8NC x 2 1/2”