Landoll WL SERIES TOOTH CONTROL KITS - Manual (Page 20)

Page 20
9J223
2
3
2
3
4
1
FRAME
TIGHTENING PROCEDURE FOR
JIC 37° SWIVEL FEMALE NUTS
1. Check flare and seat for defects.
2. Lubricate the connection.
3. Install hoses without twists.
4. Hand tighten until connection bottoms.
5. Using 2 wrenches to prevent twisting,
rotate the swivel nut 2 wrench flats
(1/3 turn).
6. For reassembly, follow the same
procedure but tighten only 1 wrench
flat (1/6 turn).
TIGHTENING PROCEDURE FOR
SWIVEL O-RING FITTINGS
1. Install the fitting until the metal washer
which backs up the o-ring contacts the
face of the boss.
2. Then orient the fitting by turning
counterclockwise up to 1 turn.
3. Tighten the lock nut using 50-60 foot
pounds torque.
4
2
MLHydSchematic
ML Pulvimulcher Conversion Kit for Independent Tooth Control
Item Part Number Qty Description Weight
1 3J603 1 HYDRAULIC CYLINDER 50.06
2 4K602 4 ADAPTER,08MJ x 08MOR 0.15
3 4K912 2 COUPLING,MALE TIP x 08FOR 0.20
4 4K919 2 HOSE ASM,3/8 x 285”,3/4-16 SWIVEL FEMALE JIC 37° 5.42
MLHydSchematic
Page 18 10-31-07