Hose lengths – Koolance EX2-750SL User Manual
Page 22
17
User Manual
Hose Lengths
Before installing your liquid coolers, appropriate lengths of tubing must be cut to
connect each device. It is generally easier to estimate the required tubing amounts
with installed computer hardware.
On the rear of the Exos, the nozzle to the
left is the outlet of the radiator. The right
nozzle is the inlet. Generally, the outlet
will connect fi rst with your CPU Cooler.
With the connected outlet
hose, roughly estimate the
length you will need to your
fi rst cooler, and cut it.
Cut the second hose with
enough length to connect
with the last cooler that will
be in your system.
Using the leftover tubing, cut
shorter pieces to link between
each individual cooler.
Coolant Inlet
Coolant Outlet
This manual is related to the following products: