Koolance EX2-750SL - Manual (Page 18)

13 User Manual
ATX Power Switch
The ATX “pass through” lead is responsible for shutting off your computer if sensor
channel #1 reaches 3ºC (5ºF) above the preset alarm temperature (See LED Display
for alarm confi guration).
Connect the male ATX power lead from
the Slot Adapter to the chassis main power
button.
Connect the female ATX power lead from
the Slot Adapter to the motherboard’s
power switch connection (often marked
“PWRSW”, “PWSW”, or “PWBT”).
This is the connection that would normally
receive the chassis power switch lead
directly.
CAUTION : The auto shutdown safety features of your Exos-2 will not
function properly without connecting the ATX power switch lead.
!
To Motherboard
To ATX Power Button